1000-B 1000m Well Drilling Rig with DTH Tools

1000-B 1000m Well Drilling Rig with DTH Tools

one thousand-B CZPT Parameter And Configuration

1,CZPT Parameter
Model: 1000-B
Max. drill depth:1000m
Drill diameter:a hundred and forty-800mm
Engine:CZPT 180KW
Operating air stress:one.05-six.45MPa
Air intake:sixteen-96.4 m³/min
Drill rod length:4.5m
Drill rod diameter:Φ89/Φ108/Φ114mm/Φ127mm
Air reverse double ply drill rod :Φ127mm(Optional)
Axial pressure: 10t
Lifting power: 40t
Gradual lifting speed:four.4m/min
Sluggish feed pace:.5-7.2m/min
Rapidly lifting pace:25m/min
Quickly feed velocity:36m/min
Rotation torque:24000Nm12000Nm
Rotation velocity:-80r/min0-160r/min
Lifting capability of large winch:4t Length of steel rope:60m
Lifting ability of little winch:one.5t Duration of metal rope:60m
Mud pump movement price:600L/min(Optional)
Centrifugal pump stream price:1300L/min(Optional)
Dynamo:24Kw/380v(Optional)
Penetration charge:ten-25m/h
Quality capacity:21°
Bodyweight:seventeen
Entire dimension:8.7×2.3×3.3 m
Software formation:Unconsolidated layer or bedding rock
Drill approach: Down the gap
Hammer: Intermediate of large air strain collection

two,Constructions functions
one. Diesel engine-driving hydraulic method. Travel, rotate, feed, hoist, land, elevate, unload and so on are all run by hydraulic components.
two. In the course of rock drilling operation, you can use down the gap hammer or reverse hammer(optional) that air compressor will supply wind to travel and slag. In procedure, you can use hammer and widespread drill rod to make optimistic circulation procedure or use reverse hammer and double ply drill rod(ingestion air through the gap of the double ply, and slag by way of the interior tube) to make reverse circulation procedure.
3. If use reducing or tri-cone bit to drill the gap, you can select mud pump and slag with mud.
4. Operating device consists of feed system, slide manual(mast), prime-driving rotary head, slide plate, centering equipment, unloading program and hoisting program, etc.
5. CZPT pressure integrates the prime-driving rotary device into block to comprehend the electricity output of the torque and speed of the two finishes in consistent energy, low speed higher torque and large velocity minimal torque. In get to adapt to distinct site conditions and drilling iameters.
6. Rotary device is able of turning absent from the drilling axis, and make it handy for the winch to fall the pipe and run.
seven. Cylinder plate chain propulsion method, reliable and sturdy
8. Roller slide is wearable.
9. Axial stress, feed speed and rotation speed are adjustable.
10. The lifting capacity of huge winch is four tons. The metal rope is sixty meters long, and it can aid with lifting, dropping the pipe. The lifting ability of tiny winch is one.five tons, and can raise drill bits, tools, etc. Or support with discharging drill rod.
11. Crawler self-driven construction journey mode, simple to shift. Use crawler chassis. Steel monitor website link(Inlaying rubber block is in choice which is simple to vacation on city streets).With 4 large landing legs as regular configuration. For the duration of lengthy-distance transportation loaded with automobile, it can be moved on to the motor vehicle straight and straightforward for transportation, no need to carry.
12.Different hydraulic oil cooler enables the drill rig to work repeatedly and the temperature of hydraulic oil won’t get higher.
13. In the course of operation, four hydraulic landing legs will adjust the rig physique degree and security.
fourteen. Throughout operation, the mast can be fastened with the rig physique, and a again knighthead will boost the operation stability of the mast.
15. Amount instrument and devoted centering equipment guarantee the perpendicularity and accuracy of the drilling hole.
sixteen. Compressed-air program provides particular oil mist lubricator to lubricate the hammer and lengthier the serving life of it.

 

Primary Software

Drilling wells for urban and rural existence

Drilling wells for agricultural irrigation and industries

Drilling for geotechnical survey

Drilling development engineering holes

Drilling geothermal pump wells 

 

Working Images

one. Air Drilling

2. Mud Pump Drilling

three. Core Drilling

Welcome to your inquiries, we will provide our very best support, very good top quality items and competitive price all the time.

                                 Drilling Parameter
Gap diameter :                           90–1200(mm)
Hole depth :                                    250(m)
Run Of Rod :                                    three,four(m)
Drill rod diameter : φ60 φ73 φ89 φ95 φ133(mm)
Drilling Technologies :        Normaland Reverse Circulation for equally Mud and Air
Down-The-Gap hammers:       Middle-High-Strain Air
Overall performance Parameter
Drill CZPT Inside of Diameter :         Φ35 φ60   φ80   φ120
Drill CZPT lifting pace(m/s) :            .37             .16
Drill CZPT lifting Force(kN) :            forty five.4           a hundred and five
Drill CZPT Spin Speed:         A(Ahead:14-23-52-eighty four,Reverse:eight-13-29-47r/min)
B(Ahead:32-fifty two-116-188,Reverse:18-29-sixty five-106r/min)
Form Parameters
Proportions :           (L-W-H) Functioning conditions 5300×2000×7200(mm)
Transport status:         (L-W-H)7900×2000×3000(mm)
Supporting Type :                         Mechanical Screw
Mast Up-Down :                            CZPT Unit
Rig mass :                                       3800(Kg)
Chassis :                              Trailer with four wheels
Power Unit :                                 Diesel Motor
Electricity :                                       49(kW)
Pump :                  LBN-twenty Standard and Reverse Circulation Pump Team
Circulation(m³/h) :                                            eighty
Major CZPT Lifting Pressure :           20.six(kN)
Feed Thrust :                    -fifteen(kN)
Notes: Drill head spin velocity can be picked, A is standard

 

1000-B 1000m Well Drilling Rig with DTH Tools

Tags
May 2024
M T W T F S S
 12345
6789101112
13141516171819
20212223242526
2728293031