small worm gearbox

Small Precison Worm Decrease Gearboxes
There are many of specifications you will need to consider when coming up with a worm gearbox selection.
First, what is the input and output torque requirements? Next, verify vendor horsepower/torque charts and pick the correct worm gear reducer.
If how big is the gearbox will likely be an important consideration after that check the reducer small worm gearbox dimension specifications, not all manufacturers make compact units. Actually, working with the right supplier will help you not merely find the right equipment reducer but also prevent some of the most common errors in reducer selection. We offer a free guide to assist you find the appropriate supplier to work with.
For low and fractional horsepower software you can expect two sizes of worm gear reducer, the SW-1 and the SW-5. Size and torque output will be the major differences between both of these models. Both feature either a hollow or solid output shaft. Both models are compact and provide users a wide range of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your particular application or project is vital to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Little precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes at the top and bottom
• Flush fitting bearing caps easy to install
• Input shafts installed on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is necessary. This right angle equipment motor is indeed versatile it could work just about anyplace.
Features & Options
Double Shaft or Single Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power offers designed and built unique, high accuracy mini gearboxes that can’t be found anywhere else. Our miniature gearboxes can be found in many configurations, including worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide customized micro gearboxes that were created and built to meet your unique specifications.
E mail us for the mini gearbox your application requires, or ask for a quote upon a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, rate reducers, equipment drives, and gearmotors. All terms can be used pretty much interchangeably. Please be aware that the links for our little gear drives include information on the full selection of frame sizes for that series or design.
Bevel Box Micro Gear Drive
Our bevel box miniature gear drives are software rated for the the best possible balance of performance and cost. Torque can be balanced to meet your RPM and operating life requirements. Light-weight with low backlash functionality (as little as 1°, with option of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a concise package. They provide an output shaft at 90° from the input, and so are obtainable in gear ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminum housings and hardened alloy metal gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc moments of backlash or better. Also known as “shaft to bore gearboxes,” the unit provide a single input shaft that protrudes from opposing sides of the housing; output is certainly a keyed bore. Standard single- and double-end shafts can be found and supplied with keys and retainer rings. An array of gear ratios and insight sizes are available to meet your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Obtainable in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and permanent lubrication. They provide two insight shafts on opposing sides of the frame, with two output shafts perpendicular to the insight shafts. Our mini 4 shaft worm gear drives deliver high effectiveness performance with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input speeds up to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes generate an output at 90° from the insight. They deliver superior performance in a wide variety applications and are constructed with small footprints, making them perfect for procedures where space is bound. They offer high performance with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: as low as ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and so are rated for boosts to 3,000 RPM. Aluminum housings and stainless gears and shafts make these inline spur gearboxes difficult and corrosion resistant, for your many demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm equipment reducers deliver superior performance with high efficiency, and feature rugged construction for challenging power transfer operations. Available in three gear ratios (5:1, 10:1, 20:1), our compact worm gearboxes are designed in extremely compact footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and manufacture a custom miniature gearbox to meet your unique specifications. We can produce customized micro gearboxes in any configuration the application requires, with output torque levels as high as 900Nm. We can work from your own gearbox designs, reverse engineer an existing unit, or help you develop an all-new style that delivers the performance you need. Request a quote on a custom made miniature gearbox or contact us to discuss your specific requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes made to suit
Input & Output Shafts
Input and output shafts with drive key and retainer rings could be supplied to your specifications for any of our hollow bore miniature gearboxes. We offer a basic selection of solitary ended or double ended shafts to put together in these gearboxes. All gearbox shafts are supplied with keys and retainer bands.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our application engineers to discuss your particular needs.
We provide a broad collection of misalignment shaft couplings in inch and metric bore sizes. Inch and metric precision ground shafts can be found from stock.
Contact Us for High Performance Miniature Gearboxes
We are the miniature gearbox professionals. All of our micro gear drive models deliver superior functionality in a small footprint, and are durable enough for challenging function environments. E mail us to find out more about our mini gearboxes, or ask for a quote on a custom model that is tailored to your preferences.
Additional benefits of worm drive gearboxes include:

Tags
June 2024
M T W T F S S
 12
3456789
10111213141516
17181920212223
24252627282930