PHD series CNC Higher-Velocity Drilling Machine For Metal Plates
Relevant industry: Utilized for the drilling processing for tube plate, clapboard and flange, in petrochemical, boiler, and wind energy flange industries, also for joint plates in constructing, bridge, iron tower, and many others.
Merchandise Standard Parameter:
| Model | PHD1616 | PHD2016 |
| Max work piece dimensions (L×W) | 1600x1600mm plate or Φ1600mm flange |
2000x1600mm plate or Φ1600mm flange |
| Thickness of function piece | six–120mm | six–120mm |
| Drill device kind | sliding desk, servo manage | sliding table, servo manage |
| Drill head quantity | A single and ATC (8 pictures resources) | One and ATC (8 pics resources) |
| Spindle motor electricity | 15Kw | 15Kw |
| Max drill diameter | Φ40mm | Φ40mm |
| Taper hole of spindle | BT40 | BT40 |
| Spindle velocity | thirty~3000r/min | thirty~3000r/min |
| Spindle vertical stoke (Z axis) | 300mm | 300mm |
| Servo motor electricity of X axis | 2. kW | 2. kW |
| Servo motor electricity of Y axis | one. 5 kW | one. 5 kW |
| Servo motor energy of Z axis | 2. kW | 2. kW |
| Motor electrical power of scrap cleaner | .seventy five kW | .seventy five kW |
| Clamping sort | twelve CZPT clams and T-slot | twelve CZPT clams and T-slot |
| CZPT control kind | SIEMENS 808D | SIEMENS 808D |
| CNC axis quantity | three | three |
| Position precision | ±0.08mm | ±0.08mm |
| With operate of CAD/CAM computerized era | ||
| With operate of crack position memory (Restart generation simply right after electrical power off) | ||
| General size | About 4500x3900x3200 | About 4900x3900x3200mm |
| Weight | About 12000 | About 14000 |
Solution feature:
1. Large-load linear roller guide pairs are equipped on two sides of the equipment mattress respectively. The longitudinal motion of the gantry’s two sides is pushed synchronously by means of AC servo motor and specific ballscrew pair of large pitch.
2. Two movable slides are outfitted on the cross beam of gantry. The sliders are guided by two linear roller information pairs and pushed by AC servo motor and precise ballscrew pair of large pitch respectively.
three. The slides on the cross beam are geared up with vertical CNC feeding ram-kind drilling spindle, which adopts unique conversion motor with hefty load for spindle. The motor drives the spindle by means of synchronous belt. The drilling spindle adopts ZheJiang precision spindle (innercooling) with disk spring automated broach system, hydraulic cylinder loosing cutter, extremely hassle-free to alter shank.
four. The machine is outfitted with hydraulic technique to complete the hydraulic harmony of vertical ram and hydraulic cutter loosing of spindle.
5. It adopts FAGOR8055 CNC method of Spain, equipped with RS232 interface and Lcd monitor. The automated programming presented can not only generate processing plans routinely, but also preview hole place ahead of drilling.
six.It is equipped with chain-plate kind automatic chip-conveyor and chip assortment trolley. The cooling system is outfitted with paper filer, higher-strain innercooling pump and reduced-stress outercooling pump, which are used for innercooling or outercooling of cutter.
