worm reduction gearbox

Our worm gear reducers offer an option of a solid or hollow output shaft and show an adjustable mounting position. Both SW-1 and the SW-5, nevertheless, can withstand shock loading better than other lowering gearbox designs, making them perfect for demanding applications.
Durable compression-molded glass-fill up polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Sturdy or Hollow output shaft
Adjustable mounting position
Worm Gear Quickness Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Our regular 700 Series – the heart of EP Gear’s rate reducer products – has been serving industry reliably for over 40 years. Its verified modular design has set the market standard for overall performance and may be the most imitated item in the current worm gear rate reducer marketplace. But why accept a knock-off when you’re able to have the initial – from EP Gear.
Specifications
11 basic single reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting versatility permits installation in practically any position.
Housings are straddle-milled, best and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, and also greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for excessive torque and overhung loads.
Pipe plugs allow convenient fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings are available in our eCatalog.
GEARBOX REDUCERS
Correct angle gearboxes (worm and planetary) are durable and built for 90° turns. Inline reducers (parallel shaft and planetary) happen to be an ideal match for motors with huge insight speeds, or when gearmotor effectiveness is important. Contact our technical sales personnel for help identifying which gearbox remedy is most beneficial for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm equipment reducers were created with a hollow bore and invite for a corner change with optional dual output. The reducers can be found in 12 ratios which range from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes were created with five mounting options providing versatility when incorporating the reducer into product.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The proper angle bevel gearbox combines the top features of our correct angle worm and planetary inline reducers. With a good and efficient right angle configuration, our correct angle planetary gearboxes provide a robust solution. The right angle bevel gearbox will come in 18 ratios ranging from 5:1 to 1000:1, and it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series small planetary gearbox configurations provide the smallest footprint and quietest procedure of our acceleration reducers. These gearboxes are designed to handle varying loads with little backlash. With body sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we’ve a solution to fit your needs. Our 52 frame size can be available with plastic-type material gears for noise-sensitive applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations provide the highest efficiency and best result torque of most our swiftness reducers. These gearboxes are created to deal with varying loads with small backlash. Planetary gear reducers operate even more quietly than parallel shaft reducers. With 18 ratio options which range from 5:1 to 1000:1, we have a solution to suit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes will be the top decision for constant duty applications. Their gear cluster design provides a highly effective method for dissipating high temperature. Parallel shaft gearboxes possess the shortest amount of our inline gear reducer options therefore they work very well in conditions with limited space. Our parallel shaft gear reducers offer an affordable drop-in substitute solution for most little parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, velocity reducers, worm equipment reducers and worm travel gearboxes. Gear reduction boxes include a gear arrangement when a equipment in the form of a screw, also referred to as a worm, meshes with a worm equipment. These gears are usually made from bronze and the worms happen to be steel or stainless steel.

While worm gears act like a spur gear, the worm gearboxes are significantly smaller than other gear reduction boxes. A major benefit of worm equipment reducers is certainly that they create an output that is 90° from the insight and can be utilized to transmit larger torque or reduce rotational speed. Frequently, a worm gearbox provides right hands threads; to improve the path of the output, a left-hands thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio

Tags
June 2024
M T W T F S S
 12
3456789
10111213141516
17181920212223
24252627282930